A good car amplifier is necessary for good audio experience. A car amp can control your car speakers and subwoofers so that they can rock your car. So, it is very important to find out the right car amplifier for your speakers and best subwoofers for great car audio experience. Whenever we sit in a car, we are isolated from outside noises and a theatrical environment is created with the help of car speakers. We want to be encased in a different environment that is what car amplifier and subwoofers do for us. It basically acts as a power source system to the subwoofers of the car. Its main task is to modulate the power generated from a car battery. It will fully engineer the sound system to produce high-frequency sounds and low bass beats. They are not just limited to cars but are also suitable for SUV’s, trucks and any other vehicle that wants to get rocked.
There are two categories of car amplifiers:
- Mono Amplifiers: A mono amplifier or a one channel amplifier is usually used to power one speaker. It is generally used while adding a single subwoofer to the system.
- Multichannel Amplifiers: Multichannel amplifiers are designed to power complex sound systems. They consist of two or more channels. A 2-channel amplifier is commonly used to power 2 speakers at a time, a 3-channel amplifier can power 3 speakers and so on.
Best Car Amplifiers 2017 | Top 10 With Comparison Chart
If you ask us which is the best car amplifier, we can bet you that the best one is with more number of channels. One must try to buy with more channels and amp which is more efficient. Good sound quality is obviously necessary. But we keep a check that you don’t get a hole in your pocket. So, keeping in mind the quality and pricing, we have prepared a list of amplifiers for a car that may suit you. You can leave a comment below in case you don’t find out your favorite amplifier on our list. We will be happy to add to our list.
Our Recommended List Of Best Car Amplifiers
Rockford Fosgate R500X1D
When you talk about both cheap and the best amplifier, this is the one you were looking for. Rockford Fosgate R500X1D uses 1 channel, that is, 1 speaker can be connected to it at a time. This Class D mono amplifier attributes variable Punch Bass and variable crossovers. It also comes with a remote control so that you can use it from anywhere in the car. It also has pass-through jacks so that you can bridge this amplifier with another one.
It has been rated at 300 Watts x 1 at 4-Ohms and 500 Watts x 1 at 2-Ohms. The sum of rated power comes to 500 Watts RMS. It has a dynamic power of 333 Watts x 1 at 4-Ohms 0° Res and 647 Watts x 1 at 2-Ohms 0° Res. The frequency response is 20Hz to 250Hz +/-1dB. It cools conventionally. The power input connector is through a screw terminal. The operating voltage is 9 – 16 VDC. Dimensions of this amplifier are 1.98 x 6.77 x 8.5 inches.
- Mono Block: It consists of single channel amplifier and is well suited for low-frequency applications. It is usually used to attach one subwoofer.
- Class D: They use output transistors as switches to control the distribution of power. They are very efficient, they produce less heat and take less current than traditional AB designs. They are better to buy than monoblock amplifiers.
Rockford Fosgate Prime
If you are looking for an ultra-efficient mono amplifier, your search is over. The PRIME R1200-1D 1200-watt amp comes for cars and trucks, it also stables down to a 1-Ohm load without taxing the electrical system. This subwoofer amplifier offers high efficiency through the implementation of its Class D circuitry while delivering rich, full bass to any system.
Rockford Fosgate Prime is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible for human ear) bass notes from damaging your subwoofer system. The frequency response of the R1200-1D is optimized exactly for use with subwoofers. It is a class D amplifier, that is, a high-efficiency amplifier that produces very less heat and reduces power consumption. It has a rated power of 400 Watts x 1 @ 4-Ohm, 800 Watts x 1 @ 2-Ohm and 1200 Watts x 1 @ 1-Ohm. The frequency response is 20Hz to 250Hz +/-1dB. It has a cast aluminum heatsink. Apart from that, it also has Realtime output and power supply thermal sensing. It also has short circuit protection.
Alpine manufacturers most powerful amplifiers especially for sound enthusiasts who demand higher performance and sound personalization. Although they are little heavy in the pocket, still worth the penny. The company is one of the premier manufacturers of the car audio equipment.
Noteworthy thing is that Alpine PDX series has been the recipient of the award of most innovative consumer electronics products in the vehicle audio category by 2010 CES Innovations honors award.
Alpine PDX-V9 is a 5 channel extreme power density digital amplifier. One of the best things about this amplifier is the ultra-wide frequency response. It offers listeners unmatched sound quality and detail that beats even the most high-end audiophile equipment. It has a great extended response than the typical cut-off range of digital amplifiers. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0, -3dB), and 3Hz~100kHz (+0dB, -3dB), Mono: 3Hz~600Hz (+0dB, -3dB) for 5ch.
Another good reason to buy Alpine PDX-V9 is that in this sound distortion rather decreases with increase in the frequency of volume. Most of the amplifiers start deforming sound at a greater frequency, but this one is a champ. It also has the capability to clear background noise and deliver clean sound. They are very flexible when it comes to adjusting the sound with multiple speakers and subwoofers. It has an inbuilt mechanism for adjusting heat whenever required. It automatically adjusts output power so that system may cool and there is no dropout of sound.
Speaking about the design, they can be easily matched with your vehicle as they contain removable trim rings. These rings come in different colors and can be done by oneself or by the installer.
Alpine PDX-V9 has a CEA-2006 Power rating of 100W RMS x 4 channel and 500W RMS x 1 channel. It has a very easy installation of front panel controls. If you are looking for the best thing and you have the budget. This is the one you should go for.
Pioneer GM-D9605 Gm Digital Series
If we say simply, Pioneer GM-D9605 is the most affordable system with top quality. This is the product one should buy if you want all the features and value for money. It is also one of the best-selling products on many websites. It has good sound quality and occupies very less space.
Being such a compact amplifier, it can also be used in boats and other vehicles. It has a max power of 2000 watts with the A and B channels rated at 75 watts x 4 (RMS) and the speaker output rated at 600 watts at 2 (RMS). It is a class D amplifier with bridgeable 5 channels.
It has a variable low pass and high pass filters. It helps to tune in according to user’s preference because of the low-pass filter. According to subwoofer characteristics, the amplifier is automatically adjusted. Its maximum power output is 200W x 4 (A/B), 1200W (SUB) at 2 Ohm and 400W x 2 (A/B) bridged at 4 Ohm. This is the most compact and value for money product.
JL Audio JX1000/1D
JL Audio offers unique engineering, very high-quality and great performance audio system. It is a US based company. People who love great audio would love this product. It has a very good performance even on low frequency. The best part about this product is that even on very high frequencies it hardly draws any current. It also offers very good thermal capabilities which result in better performance.
It’s rated continuous power at 14.4 V is 500 W RMS x 1 at 4 Ohms, 750 W RMS x 1 at 3 Ohms and 1000 W RMS x 1 at 2 Ohms. Its filter mode is low bass. It is a monoblock class D amplifier. Its frequency response is 20 Hz – 150 kHz (+0, -1dB). Its highest rated power (S/N ratio) is greater than 75 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth). It has a 12 dB/octave low-pass active filter for its internal channel which helps in attenuating frequencies above its filter capabilities so that no harmful sounds are produced. It also comes with optional remote control through which you can control the volume from the front of the vehicle.
BOSS Audio AR1500M Armor
BOSS offers most affordable products with best warranties in the industry. It has a large range of products sold in over 130 countries. They offer tremendous customer service and technical support for their any product. BOSS Audio AR1500M is the best seller product on many websites. Features like sound quality and high performance along with such friendly pocket price attract lots of people to buy this product. Indubitably, it’s the best product in this range.
It is rated at 1500 W MAX Power @ 2 Ohm x 1 Channel and 750 W MAX Power @ 4 Ohm x 1 Channel. It is 2 Ohm stable, that is, lowest impedance accepted by this amplifier is 2 Ohms. This results in more power and thus more sound. It belongs to class A/B which is better than class A. It can offer better sound with less distortion because of this kind of designing. It has both high level and low-level inputs which mean that it provides flexibility to build an audio system with any aftermarket source or standard factory. High-level inputs receive the signal from speakers and low level from pre-amplifier outputs of the source. Low bass can be boosted up to +18db. It also includes remote subwoofer control. It has a MOSFET circuit to maximize power efficiency. The best part of this product that is flexible enough to be matched to any speakers.
Planet Audio AC5000.1D Anarchy
Planet Audio Ac5000.1D has a very beautiful design. It comes with the blue illuminated logo of Planet Audio which makes it much more desirable. It has a very elegant and sleek design. It is rated at 5000 W MAX Power at 1 Ohm x 1 Channel, 2500 W MAX Power at 2 Ohm x 1 Channel and 1250 W MAX Power at 4 Ohm x 1 Channel. This class D monoblock amplifier is 1 Ohm stable. It also comes with remote subwoofer control that allows controlling volume easily. It comes with phase control that provides easy control of bass notes that might be missing.
It makes sure that all audio signals play together so that user can have best sound quality. One of the best features is the thermal protection. It controls the circuit in such a way by switching off amp so that amp gets cooled. It is also very safe in case of a short circuit as it just switches the amp off and it is protected. It also has the strapping capability which means double amps can join together to produce double power. It has a variable low-pass filter that allows frequencies to pass through subwoofers. It has switchable input sensitivity, that is it can be connected to any standard amp. It has the ability to boost subwoofer when they are connected to the preamp subwoofer output.
Pyle Auto 2-Channel Bridgeable Marine Amplifier
Pyle not only manufactures car amplifiers, but makes a modern media system on wheels, including navigation systems, DVD players, and iPod interfaces. They also manufacture front and rear cameras for the car.
Pyle Auto 2-Channel Bridgeable Marine Amplifier is a waterproof amplifier which can be used both in the car and marine applications. This is the newly launched version after the success of its earlier version Pyle PLMRA400 400-Watt 4-Channel Waterproof Marine/Car Amplifier.
This device is extremely powerful with its compact design. It has a waterproof and rust-resistant coating on PCB. It also has a mechanical casing. It is fit for marine usage up to 30’ + inches underwater. It is rated at 2×100 Watts RMS @ 4Ohm, 2x 200Watt MAX @ 4Ohm and 2×300 Watt RMS @ 2 Ohm. It is bridgeable and is also very easy to install with the help of an integrated cable. It has full range stereo with wireless Bluetooth and prime speaker which is very powerful. It has a high crossover high-definition music audio multi-channel system. It’s wireless Bluetooth connectivity which enables it to be connected to all the gadgets such as iPhone, iPad, Android, tablet, etc. It comes with a great speaker with full HD sound, LED light indicator and bass controls for your car. It can be used for mobile, boat or aquatic vehicle applications.
Skar Audio SK-4500.1D
Skar Audio SK-4500.1D is the most high-performance amplifier made with the best of best quality components. It is 4500-watt Class D monoblock amplifier. It is just made to perfection to rock your vehicle. Nothing more can anybody ask for their vehicle other than such a system that is complete insanity. This product has been raising bars and defining new limits for the automobile amplifier industry. Skar Audio has open door customer service. It is very easy to contact anybody in the hierarchy. Their products are developed with very refined techniques and with great precision. After developing, proper testing takes place in their testing centers.
Skar Audio SK-4500.1D. is very powerful, so make sure you have a good electrical system to run it. You can have multiple batteries to power it and also good subs are needed to handle the power. It has pulse width MOSFET power supply and heavy duty aluminum heatsink. It has great safety features like thermal, overload, and speaker short protection. It is rated at 4 ohms: 1500 watts x 1 channel, 2 ohms: 2780 watts x 1 channel, 1 ohms: 4900 watts x 1 channel, (16V) 1 ohms: 5860 watts x 1 channel and (18V) 1 ohms: 7420 watts x 1 channel. It has LED indicators power(green) and protect(red). It has a variable bass boost of 0 to +9 dB bass boost at 45 Hz. If you ready to taste the power in the world of amplifiers then u must go for this piece of intelligence and energy.
Hifonics BRX3016.1D Brutus
Hifonics is into car amp business from the time car amps came into being. The best part about this company is that they concentrate on the detailing of each product. This company is powered by Maxxsonics. Maxxsonics concentrates on how to power car audio to play music like no other product.
POWER @ 1-OHM 1x3000W, POWER @ 2-OHMS 1x2000W and POWER @ 4-OHMS 1x1000W. Its frequency response is 10 Hz -250 Hz. This product is manufactured in China. This class D amplifier has ultra-fine MOSFET circuit which maximizes power efficiency. It has LED indicators both green and red. It has built is diagnostics system. It has a very sleek and elegant design with illuminated Hifonics logo which makes it look very attractive. It also has lighted connectors and blue wash of light comes from the underside of the heatsink. It has 3-way speaker protection including overload, thermal and speaker short protection. They save speakers from getting harmed in all kinds of circumstances. You can daisy-chain multiple amps with it. Its dimensions are 17.7 x 2.4 x 9.8″ (380x62x250mm). It has a variable low-pass filter 35Hz-250Hz. It has a variable subsonic filter 15Hz-35Hz. It also has remote level control.
By looking at all the specifications, we can say it is a very powerful machine which is very suitable if you want good sound along with many unlimited features.
Other things you would need:
The subwoofer is the speaker dedicated to producing low-frequency sounds. A good subwoofer is very necessary for a car even if you hear a song on less volume or high, the quality of sound depends on subwoofers. Cars usually have small subwoofers which have little difficulty in producing low-frequency sound. The main factors you need to consider while buying subwoofer is the power, frequency, sensitivity, impedance, number of voice coils and size of the subwoofer.
You cannot run the system without wires. They should be high temperature resistant for more safety. Wires from 12-16 gauge in size are the best for matching subwoofers with amps.
How to match Subwoofers with Amplifiers?
It might be little puzzling to match correct subwoofer with the correct amplifier. You need to match X watts RMS with Y ohms. Amplifier’s capabilities must match subwoofer capacities. It is classified according to the channels of the amplifier. The power is divided per channel. To match them, each subwoofer must have equal power as amplifier channel. If the subwoofer is underwired, then it might not be able to perform as good as it can (although the speaker is not harmed). If it is overpowered, then speaker might burst. So, it is necessary to power up according to the power of channel. For example, if you have three subwoofers and amplifier has 3 channels. You can simply match them. But there might be the case when you have one channel and 3 subwoofers. What would you do then? It is simple. You can just attach all the subwoofers in either serial or parallel fashion. The total sum up of all subwoofer power should be equal to amplifier power. For example, an amplifier with three channels runs at 600 watts, there should be three subwoofers of 200 watts each.
How to find out the right amplifier for your automobile?
It is not an easy task to find out the correct amplifier, it can be very confusing to decide the right one according to your needs. Good subwoofers are also necessary to power up an amp but even if they don’t power up enough, u can still trust your amplifier. The amplifier can work magic for the system. Car amplifier is usually installed in the front head unit of your car, but you can also get an external one. There can be many reasons to buy an external amplifier like you want to get better sound quality or you have better subwoofers and you want an amplifier to match them. A better amplifier can give better sound quality along with more sensitivity.
There are certain concepts that need to be clear before matching a subwoofer and an amplifier. For attaining proper bass in your system, subwoofers should be properly matched to amplifiers. Subwoofer matching requires a single or multiple subs wired together either in series or in parallel but while matching with one amplifier all the subwoofers must be of the same type.Now some points need to be taken care of while matching a subwoofer with an amplifier. The first important concept that needs to be taken care of is total RMS power of the subwoofer then the final impedance of subs wired together and the type of amplifier.There are two types of subwoofers SVC(Single voice coil) and DVC (Dual voice coil), the difference between single and dual coil subwoofers is multiple wiring options parallel 4 ohm voice coil subwoofer with its coil wired parallel presents a 2 ohm load to amplifier accurate to use the RMS rating as compared to maximum power. For proper matching, RMS input rating of subwoofers wired should be equal to RMS output produced at the amplifier. To get the power range of the amplifier the values of power by 1.20 and 0.90.The problem that people face with subwoofer and speaker impedances is how to combine them using more than one driver or if the driver is equipped with dual voice core and the impedance directly effects the load of the amplifier so impedance should be proper as per the calculations If we want less heat to be generated at the output then a small load should be used at the amplifier which implies a larger resistance is required. Let’s say we have 300 Watt at 4 ohms and 600 Watt channel at 2 ohms so for least heat loss the largest load is placed at 2 ohms.
Now we need to determine the type of amplifier to be used, amplifiers like monoblock,1 channel,2 channel,5 channel can be used for subwoofer matching. Although, the best amplifier that can be used is mono-block amplifier as it is designed to output a lot of power at even a very low impedance. 2 channel and 4 channel amplifiers provide less power as output but we can bridge these amplifiers and use them but there are always some limitations in the practical world and the limitation is that in bridging we cannot use load lower than 4 ohms similarly monoblock amplifiers can match a lot of subwoofers unless and until maximum impedance is not exceeded.
These concepts and calculations are used to properly match a subwoofer with an amplifier with minimum damage to the system and maximum output of the amplifier.
Few the factors that help to choose the right amplifier are as follows:
- Number of channels
- Sound Quality
The number of channels needed?
The first step in finding the right amplifier is knowing the number of channels required. The number of channels determines the number of speakers amp can power. A mono amp can run one subwoofer. A two-channel subwoofer can run two subwoofers. A three-channel subwoofer can run three subwoofers and likewise. If we have a 2-channel amp, then we can run 2 subwoofers, 2 coaxial cable speakers. It can also be used by bridging and running one single bigger speaker.
Who doesn’t want more Power?
Power of an amplifier is measured in watts. It is the maximum amount of power that an amplifier can provide. You must match speakers and amplifier according to the power. An amplifier usually has power per channel. So, speakers should also have the same power. If you give less power to speakers, they may not be able to perform so well. If you give more power, they might burst. If you want to run your speakers as well as a subwoofer on the same amp, you might bridge its channels. For example, if you have a 400-watt subwoofer and amplifier has 2 channels of 200 watts each. Then you can bridge them together to get that sound quality out of your subwoofer. It works sometimes but in some cases, you will have to buy another mono amplifier with RMS according to the subwoofer.
Amplifier Sound Quality
If you have good subwoofers, it’s going to be of great advantage. It will add on quality. But even if you have very good quality subwoofers and you don’t have a good amplifier, it may not be of much use. A good amplifier can also improve the quality of speakers which might not be up to the mark. So, an amplifier sound quality is very important. Its sound quality depends on various factors such as sensitivity, low-pass filter, stability, the range of frequency. The quality of the components used also affects the sound quality of the amplifier. Thus, it is important to check the manufacturing of amplifier.
If you are going to set a completely new system containing both amplifier and subwoofer, then it is easy. You can simply choose the number of channels in amplifier and the same number of speakers accordingly with the same frequency. But if you are going to use an existing system, say an amplifier, then you need to see if the subwoofers you buy are compatible or not. The subwoofers should have the same power as that of the channel of the amplifier, only then they will be compatible otherwise bridging can also solve this problem sometimes.
Amplifiers can change the full aura and impression of the car. They may take your music to next level by boosting sound quality and booming bass. You get the original taste in music. There are many types of amplifiers available with same RDM and number of channels, but big differences in prices. You can buy an almost same thing at less price but you must try to buy brands that are more established. Mostly there is some amount of difference in sound quality of these brands. They have great precision in manufacturing small components of the system. Such brands offer better services. They might have better warranties. Choose a company that you can trust. All these products that we have chosen are from reliable companies. You must try to read people’s reviews on products. You can also check with user ratings and the best seller products. Such things give you a good idea of the product. Try to buy latest products, you can check with the year of manufacture as technology is changing very rapidly these days. Try to buy a product that you need and you can easily spend that much on it. Do not sacrifice upon the brand of the product to get more RDM or number of channels. An amplifier is the heart of the system. So, it should be decided very carefully as it is the one who decides the functioning of the entire car audio system.
Choose a company that you can trust. All these products that we have chosen are from reliable companies. You must try to read people’s reviews on products. You can also check with user ratings and the best seller products. Such things give you a good idea of the product. Try to buy latest products, you can check with the year of manufacture as technology is changing very rapidly these days. Try to buy a product that you need and you can easily spend that much on it. Do not sacrifice upon the brand of the product to get more RDM or number of channels. An amplifier is the heart of the system. So, it should be decided very carefully as it is the one who decides the functioning of the entire car audio system. For more information related to essential items for auto please visit our homepage AutoEssential.